Net internal area NIA
[edit] How is the area of a building measured?
The area of a building can be measured in a number of different ways:
- Gross external area (GEA).
- Gross internal area (GIA).
- Net internal area (NIA).
- Total useful floor area (TUFA).
- Usable floor area.
It is very important when describing the area of a building to be clear about which measure is being used, for example in property sales, planning applications, building regulations applications, lease negotiations, rating valuations, and so on.
[edit] What is the net internal area of a building?
The net internal area (NIA) of a building is the usable area measured to the internal finish of the perimeter or party walls, ignoring skirting boards, at each floor level. Net internal area includes all areas that can be used for a particular purpose. The UK government’s Valuation Office Agency (VOA) Code of measuring practice: definitions for rating purposes suggests that Net Internal Area includes:
- Kitchens.
- Any built in cupboards or units that occupy usable areas.
- Perimeter skirting boards, mouldings and trunking.
- Open circulation areas such as atria, corridors and entrance halls.
- Partition walls and other dividing elements.
Net internal area excludes:
- Internal structural walls.
- Walls (whether structural or not) enclosing excluded areas.
- Piers, columns, chimney breasts, ducts and other projections.
- Cleaner’s cupboards.
- Lifts, lift rooms, lift wells.
- Stairwells and landings.
- Stairwells, entrance halls, atria, landings and balconies used in common or for the purpose of essential access.
- Corridors and other circulation areas used in common with other occupiers or of a permanent essential nature.
- Boiler rooms, fuel stores, plant rooms and tank rooms other than those of a trade process nature.
- Car parking areas.
- Spaces occupied by cooling and heating equipment, air conditioning systems and ducting which renders the space substantially unusable.
- Areas with a headroom of less than 1.5m.
- Toilets and associated lobbies, unless additional toilets have been installed.
- Areas under the control of service or other external authorities.
NB Essential access does not include reception areas or areas capable of use and situated within entrance halls, atria and landings etc.
In relation to the term 'permanent essential nature' the code of measuring practice suggests that, 'apart from areas used in common with other occupiers, corridors excluded from NIA are those of a permanent essential nature, i.e. internal corridors between structural walls (usually found in older buildings). Fire corridors and smoke lobbies which are defined by non-structural walls - but only where they are permanent and essential to any prospective tenant of the property and do not merely serve the needs of the actual occupier. If the latter, they should be included.'
The RICS Guidance Note, A guide for Property Professionals, 6th Edition Code of measuring practice 2007, is in general agreement with the Valuation Office Agency definition, of net internal area.
[edit] Related articles on Designing Buildings
- Area.
- Case notes for rating valuation.
- Floor area ratio.
- Gross development area.
- Gross external area.
- Gross internal area.
- Gross site area.
- International Property Measurement Standards.
- Measurement.
- Measurement of existing buildings.
- Rating valuation.
- Site area.
- Size.
- Space.
- Total useful floor area.
Featured articles and news
About the 5 Percent Club and its members
The 5% Club; a dynamic movement of employers committed to building and developing the workforce.
New Homes in New Ways at the Building Centre
Accelerating the supply of new homes with MMC.
Quality Planning for Micro and Small to Medium Sized Enterprises
A CIOB Academy Technical Information sheet.
A briefing on fall protection systems for designers
A legal requirement and an ethical must.
CIOB Ireland launches manifesto for 2024 General Election
A vision for a sustainable, high-quality built environment that benefits all members of society.
Local leaders gain new powers to support local high streets
High Street Rental Auctions to be introduced from December.
Infrastructure sector posts second gain for October
With a boost for housebuilder and commercial developer contract awards.
Sustainable construction design teams survey
Shaping the Future of Sustainable Design: Your Voice Matters.
COP29; impacts of construction and updates
Amid criticism, open letters and calls for reform.
The properties of conservation rooflights
Things to consider when choosing the right product.
Adapting to meet changing needs.
London Build: A festival of construction
Co-located with the London Build Fire & Security Expo.
Tasked with locating groups of 10,000 homes with opportunity.
Delivering radical reform in the UK energy market
What are the benefits, barriers and underlying principles.
Information Management Initiative IMI
Building sector-transforming capabilities in emerging technologies.
Recent study of UK households reveals chilling home truths
Poor insulation, EPC knowledge and lack of understanding as to what retrofit might offer.
Comments
[edit] To make a comment about this article, or to suggest changes, click 'Add a comment' above. Separate your comments from any existing comments by inserting a horizontal line.
Can someone explain the design calculation? from architect point of view.
ie - lets say we have a plot of 25X10 meters in Hendon, London.
How can i calculate what is the allowed Net Ground Floor? and on the Net First Floor..?.
How to decide the allowed building contour based on plot contour?
I read that the building border should be 3 meter smaller than plot border on width and 10 meters on length - so in that case - 15 (length) on 7 (width) - which its net ground floor of 105 SQM. is it right?
what are the rules in terace house plot? in triangle plot?